Chapter 6: Ringing up Sales and Using Training Mode
66 Alpha 600sc User’s Guide
To ring up straight sales without a PLU number
1 Put the REG key in the Mode key slot and turn it to the REG1 or REG2
position. You are ready to ring up a sale.
2 Using the round Number keys area, type the price of the first item.
3 Press the Department key for that item.
To use the Department keys above 40, do the following:
• Press the Dept Shift key.
• Using the round Number keys, type the Department number from 41
to 99 that you want to use. For example, for Department 63, press the
6 key and then press the 3 key.
• Press the Dept Shift key again.
4 Repeat for the rest of the items.
5 When you are done ringing up items, press the Amount Tend Total key.
The cash drawer opens and the receipt or journal prints.
6 Make any change needed and place the money you are given in the cash
drawer.
7 Close the cash drawer.
8 Give the customer the receipt, if the cash register is set to print receipts.
You are ready to ring up another sale.
To ring up straight sales with a PLU number and not using the barcode
reader
1 Put the REG key in the Mode key slot and turn it to the REG1 or REG2
position. You are ready to ring up a sale.
2 Using the round Number keys area, type the PLU number of the first
item.
3 Press the PLU key.
4 Repeat for the rest of the items.
5 When you are done ringing up items, press the Amount Tend Total key.
The cash drawer opens and the receipt or journal prints.
6 Make any change needed and place the money you are given in the cash
drawer.
7 Close the cash drawer.
8 Give the customer the receipt, if the cash register is set to print receipts.
You are ready to ring up another sale.
To Next Page
Loading...
