Alpha 600sc User’s Guide 93
Half System Clear
Half System Clear
If you cannot get the cash register to respond, try a half system clear.
To do a half system clear
1 Turn the Mode key to the OFF position.
2 Unplug the cash register from the power source.
3 Wait 30 seconds.
4 Plug the cash register in again.
5 Continue with normal operations.
Full System Clear
If nothing else works, perform the following procedure.
To do a full system clear
1 Turn the Mode key to the OFF
position.
2 Remove one back-up battery.
3 Unplug the cash register from the
power source and wait 5 minutes.
4 Plug in the cash register.
5 Replace the battery.
6 Reprogram the cash register.
7 Continue with normal operations.
If Nothing Helps
If a problem still persists, call our Customer Service Support Line toll-free
at 1-800-272-6229.
Caution
This procedure resets the cash register to the factory settings. You lose all
your transaction information and programming information.
To Next Page
Loading...
