Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment. There are some important
differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the
wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each
intended application of this equipment is acceptable.
In no event will RS Automation Co., Ltd. be responsible or liable for indirect or consequential damages resulting from the use or
application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements
associated with any particular installation, RS Automation Co., Ltd. cannot assume responsibility or liability for actual use based on the
examples and diagrams.
No patent liability is assumed by RS Automation Co., Ltd. with respect to use of information, circuits, equipment, or software described in
this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of RS Automation Co., Ltd., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
Identifies information about practices or circumstances which may lead to serious personal injury or death, properity
damage, or economic loss.
Identifies information that is critical for successful application and understanding of the product.
Idnetifies information about proctives or circumstances that can lead to minor personal injury, properity damage,
ecconomic loss, or product malfuntion. However, depending on the situraiton, failutre to follow the directions
accompanying this symbol may also lead to serious consequences.
To Next Page
Loading...