55
4.24 - Adding the Epropulsion Motor
p)
Once all the cables are connected,
connect the battery cable to the
battery as indicated in the image.
Installing the battery, lower the battery and
the slide forward and down until you hear an
audible ”CLICK”. Check the batter is located
securely before sailing.
Install the battery base using 14 x 2”pozi pan
screws. Make sure the base is located so the
battery can locate without hitting the bulkheads.
Removing the battery, Lift the blue
handle and lift and slide the battery
back and away from the bracket.
1
2
To Next Page
Loading...
