2
Section 1
Section 1Section 1
Section 1
Product Description
The MiniGalaxy E CO
2
Incubator is designed to ensure accurate and reliable operation. The unit
incorporates a touch sensitive keypad and two, 3 digit L. E. D. displays which allows easy setting and
monitoring of the chamber condition.
The microprocessor control system ensures a rapid, controlled return to optimum chamber conditions
after a door opening whilst also preventing any overshoot.
A thermal heating element completely surrounds the incubator providing an even temperature within
the chamber. The independently heated outer door is designed to ensure an even distribution of heat
thereby eliminating condensation on the inner door.
Incorporated into the unit is an over temperature safety system. This operates independently of the
main control system.
A purpose designed humidity control system allows a high uniform relative humidity and prevents
undesirable condensation in other parts of the chamber. The manual control system allows limited
adjustment over an approximate range of 95 – 97% r/h.
A solid state infra red sensor is used to control the level of CO
2
giving excellent reliability and is
unaffected by humidity. The CO
2
system has a semi-automatic zero function which provides a simple
process for the user to follow to maintain the correct CO
2
level within the chamber.
There is a two level alarm system. The chamber monitoring alarm is programmable and will alert you
if temperature or CO
2
have not recovered within a preset time after the door has been opened. If not
required, this system can be disarmed. System alarms occur only if a fault has developed which
requires user intervention to rectify.
Air circulation is achieved without the use of a fan eliminating this potential source of contamination
and reducing small sample evaporation within the chamber.
The 50 litre chamber and all internal components are manufactured from polished stainless steel.
The shelf rack system is designed for complete removal and easy access to the smooth interior for
quick and thorough cleaning.
The outer shell of the incubator is manufactured from zinc plated stove enamelled steel to give a
durable corrosion resistant finish.
The outer door and top cover are vacuum formed from ABS plastic and they provide a high level of
insulation. The keypad and display are incorporated into the top cover permitting maximum usable
chamber volume.
To Next Page
Loading...