To Next Page

To Previous Page

It’s Under Control

BEEPER

This button displays a window that allows you to turn the audible beep On

or Off. The beeper provides feedback that a button was pressed. Press the

OK button in the window to close.

TIME OUT

This button displays a window that allows you to adjust the amount of time

the unit stays awake after the last button press. The time is variable from

1 second to 60 seconds (default is 10 seconds). Press the arrows to the

left or right of the Time Out setting to adjust the time. Press the OK button

in the window to close. During Sleep mode, the remote uses virtually no

battery power.

TILT SWITCH

This button displays a window that allows you to adjust the settings for the

built in tilt switch, which is a device that turns the remote on when tilted

past a 45 degree angle.

On means the tilt switch is active and will turn on display and backlight

when picked up.

Off means the tilt switch is inactive.

Press the OK button in the window to close.

Questions and Answers:

Need help?

Do you have a question about the RTI T2-B and is the answer not in the manual?

RTI T2-B Specifications

General