Universal System Controller
T2-B
22
CHAPTER 3 | OPERATION
CLEAR ALL
This button displays a window that will allow you to erase the current
program in the remote. When the button is pressed, you will be prompted
to enter the current passcode. If the proper code is entered, the entire
program in the remote will be erased.
WARNING!
This will erase the complete program in the remote with
no way to restore it, except by reloading the program
from the Integration Designer™ software!
If you inadvertently press the CLEAR ALL button, simply press the ENTER
button without entering the passcode and you will be returned to the
Control Panel page.
To Next Page
Loading...
