RTI VX88-18G - Page 24

To Next Page

To Previous Page

VX88-18G USER GUIDE

www.rticorp.com

Matrix Main (MCU) Firmware Update

The Matrix main (MCU) rmware update is completed from within the Matrix Web GUI. It is important that

the Web GUI rmware is applied PRIOR to updating the main MCU rmware for the Matrix.

To update the main (MCU) rmware:

1) Login to the matrix Web GUI:

Default IP Address is: 192.168.0.200

Default Username is: RTI Default Password is: RTI123

Please Note: the username/password follows the Admin username/password as per the Web GUI, which

would be changed upon rst entering the Web GUI.

The IP Address may dier if network settings have been updated. If this is the case, please replace the

following with the products current IP address: xxx.xxx.xxx.xxx:100.

2) Once the main product Web GUI has been accessed, click on the tab at the top of the page marked

‘Upgrade Firmware’:

3) Select ‘Browse’

4) Press ‘Choose File’ and select the main (MCU) rmware le downloaded from the RTI website. This will be a

.app type le.