VX88-18G USER GUIDE
www.rticorp.com
08
This following pages take you through the operation of this Matrix’s Web GUI. You must connect the TCP/IP
RJ45 socket to your local network in order to access the products Web GUI.
By default the matrix is set to DHCP, however if a DHCP server (eg: network router) is not installed the matrix
IP address will revert to below details:
Default IP Address is: 192.168.0.200 Default Username is: RTI Default Password is: RTI123
Please Note: this product will always ask you to set an admin password when you connect to the Web GUI
for the rst time.
The Web GUI supports multiple users along with multiple user permissions as follows:
Guest Account - This account does not require a user to login. The Guest account can only change sources
for each zone. Guest access can be changed / removed completely by the Admin, limiting inputs or outputs
as required.
User Accounts - up to 7 User accounts (on top of 1 Guest account) can be utilized, each with individual login
details. User accounts can be assigned permissions to specic areas and functions. A User must rst login to
make use of these functions.
Admin Account - This account allows full access to all functions of the Matrix, as well as assigning users with
permissions.
Guest Control Page
The Guest Control Page allows a guest user to change inputs for each zone (output) without needing to be
logged into the Matrix. Simply select the square that corresponds with the input and zone you wish to change.
There is also a power button on the lower right corner to turn the Matrix on or o.
Web GUI Control
To Next Page
Loading...