Ruby Tech FGS-2824 - Page 132

FGS-2824 User Manual
Publication date: July, 2005
Revision A1
122
reAuthEnabled:
Choose whether regular authentication will take place in this port.
Default: ON
reAuthPeriod(1-65535 s):
A non-zero number seconds between the periodic re-authentication of
the supplicant.
Default: 3600
max. Request(1-10):
The maximum of number times that the authenticator will retransmit an
EAP Request to the supplicant before it times out the authentication
session. The valid range: 1 – 10.
Default: 2 times
suppTimeout(1-65535 s):
A timeout condition in the exchange between the authenticator and the
supplicant. The valid range: 1 –65535.
Default: 30 seconds.
serverTimeout(1-65535 s):
A timeout condition in the exchange between the authenticator and the
authentication server. The valid range: 1 –65535.
Default: 30 seconds
Fig. 3-58