FGS-2824 User Manual
Publication date: July, 2005
Revision A1
4
1-2. Checklist
Before you start installing the switch, verify that the package contains the
following:
FGS-2824 8-Port TP + 16-Port SFP L2 Managed Gigabit Switch
Modules (optional)
Mounting Accessory (for 19” Rack Shelf)
This User's Manual in CD-ROM
AC Power Cord
RS-232 Cable
Please notify your sales representative immediately if any of the aforementioned
items is missing or damaged.
1-3. Features
The FGS-2824 L2 Managed Switch, a standalone off-the-shelf switch,
provides the comprehensive features listed below for users to perform system
network administration and efficiently and securely serve your network.
•
••
•
Hardware
• 8 10/100/1000Mbps Auto-negotiation Gigabit Ethernet TP ports
• 16 1000Mbps SFP Fiber ports
• 400KB on-chip frame buffer
• Jumbo frame support
• Programmable classifier for QoS (Layer 4/Multimedia)
• 8K MAC address and 4K VLAN support (IEEE802.1Q)
• Per-port shaping, policing, and Broadcast Storm Control
• IEEE802.1Q-in-Q nested VLAN support
• Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
• Extensive front-panel diagnostic LEDs; System: Power, TP Port1-8: LINK/ACT,
10/100/1000Mbps, SFP Port 9-24: SFP(LINK/ACT)
•
••
•
Management
• Supports concisely the status of port and easily port configuration
• Supports per port traffic monitoring counters
• Supports a snapshot of the system Information when you login
• Supports port mirror function
• Supports the static trunk function
To Next Page
Loading...
