Ruby Tech FGS-2824 - Page 174

FGS-2824 User Manual
Publication date: July, 2005
Revision A1
164
enable storm-rate
Syntax:
enable storm-rate <range> <data_rate>
Description:
To set up the storm-rate of the ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 24
<data_rate>: 0-1000.
Possible value:
<range>: 1 to 24
<data_rate>: 0-1000.
Example:
FGS-2824(bandwidth)# enable strom-rate 1-16 150
show
Syntax:
show
Description:
To display all current settings of the bandwidth.
Argument:
None
Possible value:
None
Example:
FGS-2824(bandwidth)# show
Ingress Egress
Port ================================================= ======================
All State All Rate Storm State Storm Rate All state All Rate
====== =========== ========== ============= ============ =========== ==========
1 Disabled 0 Disabled 0 Disabled 0
2 Disabled 0 Disabled 0 Disabled 0
3 Disabled 0 Disabled 0 Disabled 0
4 Disabled 0 Disabled 0 Disabled 0
5 Disabled 0 Disabled 0 Disabled 0
6 Disabled 0 Disabled 0 Disabled 0
7 Disabled 0 Disabled 0 Disabled 0
8 Disabled 0 Disabled 0 Disabled 0
9 Disabled 0 Disabled 0 Disabled 0
10 Disabled 0 Disabled 0 Disabled 0
:
:
:
23 Disabled 0 Disabled 0 Disabled 0
24 Disabled 0 Disabled 0 Disabled 0