Ruby Tech FGS-2824 - Page 231

FGS-2824 User Manual
Publication date: July, 2005
Revision A1
221
set tag-group
Syntax:
set tag-group <vid> <name> <range> <#>
Description:
To add or edit the tag-based vlan group.
Argument:
<vid>: vlan ID, range from 1 to 4094
<name>: tag-vlan name
<range>: vlan group members, syntax 1,5-7, available from 1 to 24
<#>: sym/asym vlan setting. 1: symmetric vlan, 0: asymmetric vlan
Possible value:
<vid>: 1 to 4094
<range>: 1 to 24
<#>: 0 or 1
Example:
FGS-2824(vlan)# set tag-group 2 VLAN-2 2-5,6,15-13 0
set mode metro [up-link]
Syntax:
set mode metro [up-link]
Description:
To create metro groups, and select a port(s) as up-link port.
Argument:
Up-link: You can choose port 23 as “23”, port 24 as “24”, or port 23&24 as
“23,24”,”23-24”.If you do not choose any up-link port, system will take port 24.
Possible value:
[up-link]: 23 or 24 or “23,24” or “23-24”
Example:
FGS-2824(vlan)# set mode metro 23-24
show group
Syntax:
show group
Description:
To display the vlan mode and vlan group.
Argument:
None
Possible value:
None