FGS-2824 User Manual
Publication date: July, 2005
Revision A1
83
Add Group:
Create a new Port-based VLAN. Input the VLAN name and choose the
member by ticking the check box beside the port No., then, press the
<Apply> button to have the setting taken effect.
Fig. 3-34
Delete Group:
Just press the <Delete> button to remove the selected group entry from
the Port-based group table.
Fig. 3-35
Edit a group:
Just select a group entry and press the <Edit> button, then you can
modify a group‘s description and member set.
To Next Page
Loading...
Need help?
General
