SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A 6
About This Guide
This SmartCell Gateway™ 200 Getting Started Guide provides information on how
to set up the SmartCell Gateway 200 (SCG-200 or “the controller”) appliance on
the network. Topics covered in this guide include mounting, installation, and basic
configuration.
This guide is intended for use by those responsible for installing and setting up
network equipment. Consequently, it assumes a basic working knowledge of local
area networking, wireless networking, and wireless devices.
NOTE: If release notes are shipped with your product and the information there
differs from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader Portable
Document Format (PDF) or HTML on the Ruckus Wireless Support website at
https://support.ruckuswireless.com/documents.
To Next Page
Loading...
Need help?
General
