Hardware Installation and Reference Guide Preparing for Installation
9
Keep the device away from the grounding facility or lightning and grounding facility of the power device as
much as possible.
Keep the device far away from high-frequency current devices such as high-power radio transmitting stations
and radar launchers.
2.2.5 Checking the Mounting Workbench
Regardless of whether the device is installed on a desktop or wall, the following conditions must be met:
The desktop or wall surface must be smooth and clean.
The network cables must be in good condition.
2.3 Tools
Phillips screwdriver, cables, fastening bolts, diagonal plier, cable ties,
Wire stripper, crimping plier, RJ45 crimping plier, and wire cutter.
Multimeter and bit error rate tester (BERT)
Note
The RG-EW3000GX PRO router is not shipped with a tool kit. You need to prepare a tool kit by yourself.
To Next Page
Loading...
Need help?
General
