Ruijie Reyee RG-EW3000GX PRO - Common Troubleshooting; Troubleshooting Flowchart; Common Faults; The LED Is off after the Device Is Powered on

Hardware Installation and Reference Guide Common Troubleshooting
15
6 Common Troubleshooting
6.1 Troubleshooting Flowchart
6.2 Common Faults
6.2.1 The LED Is Off After the Device Is Powered On
Check whether the supplied power adapter is connected properly, and whether the Ethernet cable is connected
properly.
6.2.2 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In
Check whether the device at the other end of the Ethernet cable is working properly. Check whether the Ethernet
cable is capable of providing the required data rate and is properly connected.
6.2.3 A Client Cannot Discover the SSID of the Router
(1) Check whether the router is properly powered on.