Ruijie Reyee RG-NBR-E Series - Hard Disk Module Specifications

Hardware Installation and Reference Guide Preparations before Installation
15
2.2.5 Checking the Installation Location
No matter the enterprise-class router is installed in the cabinet or on the workbench, the following requirements
shall be met:
 Make sure sufficient room has been reserved for the air intake and air vent of enterprise-class router to
facilitate the heat elimination of the chassis. It is recommended to install the enterprise-class router in the 19-
inch standard cabinet. Otherwise, install it on a clean and flat surface. In heated areas, the air conditioning
system shall be equipped.
 Make sure the cabinet and workbench is equipped with a good ventilation and cooling system.
 Make sure the cabinet and workbench is steady enough and capable of withstanding the weight of the
enterprise-class router and its accessories.
 Make sure the cabinet and workbench is properly grounded.
2.3 Installation Tools and Devices
To enable smooth installation, prepare the following items:
 Installation tools
 Connecting cables
 Related devices
Installation tools include:
 Phillips screwdriver
 Anti-static wrist strap
Connection cables include:
 Power cables
 Configuration cables
 Ethernet cables
 Grounding wires
Related devices include:
 HUB or switch
 Configuration terminal (Mobile phone with App)
 Electric outlet