Use M8x60 expansion bolts to implement the wall mount.
a. Attach the bracket to the wall and mark the screw hole locations. Secure the mounting bracket on the wall using
M8x60 expansion bolts.
Figure 3-2 Installing the Bracket
b. Align the host with bracket and mounting plate to the bracket on the wall, and tighten the M8x20 screws to complete
installation.
Figure 3-3 Mounting the Bracket on Wall
Pole mount (Vertical)
a. Attach the bracket to a pole with hose clamps and fasten the clamps with screws and nuts.
Figure 3-4 Mounting the Bracket on a Pole
To Next Page
Loading...
Need help?
General
