1-3
The client IP address is set in the same network segment as the device IP address, such as 10.44.77.199. The subnet
mask is 255.255.255.0. The default gateway is device management address 10.44.77.1. Alternatively, you can set the IP
assignment mode to Obtain an IP address automatically.
Server requirements:
You can log into the eWeb management system through a LAN port or from Ruijie Cloud on an external network.
The Web service (enabled by default) needs to be enabled on the device.
Login authentication (enabled by default) for Web-based management needs to be configured for the device.
A management IP address needs to be configured for the device (the IP address is automatically obtained by default).
To log into the eWeb management system, open the Google Chrome browser, and enter 10.44.77.200 in the address bar, and
press Enter.
2.2 Wizard
You need to quickly configure the device (the network name, management password, and management IP address of the
device) when logging into the eWeb management system for the first time (for initial configuration).
Configuration description:
Network Name identifies the network where the device is located (which needs to be entered by the user upon initial
use).
Password indicates the login password. (Please remember the management password and keep it carefully.)
IP Assignment indicates the network access mode of the device, including DHCP (the DHCP server allocates a dynamic
IP addresses) and Static IP Address (the user enters a specified IP address in the required format).
To Next Page
Loading...
Need help?
General