Ruijie RG-S2928G-E - Page 8

Indicator
Faceplate
Marker
Status
Indication
Solid yellow
System over-temperature warning.
Solid red
Serious over-temperature, the system will stop
working forcibly by itself.
10/100/1000 Mbps RJ-45 port
indicator
1~24
Off
The port is NOT connected.
Solid green
The port is connected at 1000Mbps.
Solid yellow
The port is connected at 100/10Mbps.
Blinking
The port is transmitting or receiving data.
100Base-FX/1000Base-X/Stack
port indicator
(Note: Only the four SFP ports
of the RG-S2928G-E V2.00 and
later support 100Base-FX.)
25F~28F
Off
The port is NOT connected.
Solid green
The port is connected.
Blinking
The port is transmitting or receiving data.
1.2 RG-S2952G-E
Technical Specifications
Model
RG-S2952G-E
CPU
Single-core CPU, clock speed of 600M
BOOTROM
8M
Flash Memory
128M
SDRAM
DDRII 128MB
Supported
SFP Type
 Gigabit Ethernet:
MINI-GBIC-SX-MM850
MINI-GBIC-LX-SM1310
MINI-GBIC-LH40-SM1310
MINI-GBIC-ZX50-SM1550
MINI-GBIC-ZX80-SM1550
MINI-GBIC-ZX100-SM1550
 Fast Ethernet:
FE-SFP-LX-MM1310
FE-SFP-LH15-SM1310
 1000Base-T:
Mini-GBIC-GT
 2.5 G stack module:
GE-SFP-STACK1.6M
The supported module type may change at any time. Contact us for the detailed change