information.
Only the four SFP ports of the RG-S2952G-E V2.00 and later support fast Ethernet SFP
modules.
Support 1000 Base-X, 1000 Base-T, 100 Base-FX and 2.5 G stacked SFP module
Only the four SFP ports of the RG-S2952G-E V2.00 and later support 100Base-FX.
One Type-A USB2.0 interface
AC input:
Rated voltage range: 100 V to 240 V
Maximum voltage range: 90 V to 264 V
Frequency: 50/60 Hz
Rated current: 2 A
HVDC input:
Maximum voltage range: 192 V to 290 V
Rated current: 0.3 A to 0.17 A
Not supported on the RG-S2952G-E V1.00 and later
Supported on the RG-S2952G-E V2.00 and later
Less than 59 W on the RG-S2952G-E V1.00 and later
Less than 49 W on the RG-S2952G-E V2.00 and later
Support adjustment of fan speed and warning of fan troubles.
440 mm x 260 mm x 43.6 mm