Hardware Installation and Reference Guide Product Overview
7
5% to 95% RH (non-condensing)
Fan Speed Control
Fan Fault Alarming
Safety Regulation
Compliance
442 mm x 220 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)
Appearance
The front panel of the RG-S5300-24GT2SFP2XS-E switch provides 24 10/100/1000Base-T Ethernet ports, two GE SFP ports, two 10GE
SFP+ ports (The speed is 1000 Mbps by default and can be improved to 10 Gbps if you purchase a license. Without a license, the port
can make a successful link only when the peer end speed is 1000 Mpbs. If configured as a VSL port, the port supports a speed of 10
Gbps without the license), one management port, one Console port and one USB port. The back panel has an AC power plug.
Figure 1-5 RG-S5300-24GT2SFP2XS-E Switch Appearance
Front Panel
Figure 1-6 Front Panel of RG-S5300-24GT2SFP2XS-E
To Next Page
Loading...
