24 DRUM MOTOR INSTALLATION MANUAL 80LP-138LP
Installation Declaration
In accordance with the EC Machinery Directive
2006/42/EC, Appendix II 1 B
The manufacturer
RULMECA Poland …
hereby declares under its exclusive
responsibility that the product series
• Drum motor LP series
• Drum motor LP-C series
fully complies with the health and safety
requirements of the Machinery Directive
2006/42/EC Appendix I.
The relative technical documents according to EC
Machinery Directive 2006/42/EC, Annex VII B are
available and will be presented to the competent
national authorities in digital form on request.
The partly completed machinery complies with
the following EC directives:
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EC
Initial startup of the partly completed
machinery is not permitted until the partly
completed machinery is incorporated into
a system that complies with the machinery
directive. The EC declaration of conformity
must be available in accordance with appendix
II A.
The EC declaration of conformity must be
available in accordance with Machinery
Directive 2006/42/EC Annex II 1 A.
APPENDIX
To Next Page
Loading...
