Need help?Do you have a question about the Runva EWP2500 and is the answer not in the manual?
Explains the importance of understanding winch operation, specifications, and components for safe and confident use.
Adhere to capacity limits, avoid vertical lifting, and never use for people. Use intermittently.
Maintain minimum wraps, safe distances, use snatch blocks for heavy loads, and avoid unsafe cable handling.
Disconnect power, avoid shock loads, use proper spooling, no hoist, no overhead lifting.
Use gloves, never connect cable to itself, block wheels, limit pull duration, cool motor, use hand saver.
Plan your pull, assess the situation, and prepare by wearing gloves.
Follow the step-by-step procedure for engaging the winch, pulling the load, and securing the vehicle.
Ensure the mounting channel is flat and the winch is properly aligned for even load distribution.
Install the winch by connecting components, securing the unit, and connecting electrical leads.
Select proper anchor points, use slings, avoid acute angles, and never use for overhead lifting.
Follow the steps to demonstrate winch operation, including clutch engagement and test runs.
Follow the procedure to replace the wire rope, ensuring correct installation and tension.
Perform routine checks on bolts and connections, keep clean, and note gearbox sealed status.
Details key winch specifications including pull rating, motor, dimensions, and weight.
Provides performance data like pull speed, current draw, voltage, and rope capacity per layer.
Details key winch specifications including pull rating, motor, dimensions, and weight.
Provides performance data like pull speed, current draw, voltage, and rope capacity per layer.
Details key winch specifications including pull rating, motor, dimensions, and weight.
Provides performance data like pull speed, current draw, voltage, and rope capacity per layer.
General| Model | EWP2500 |
|---|---|
| Motor | Permanent Magnet |
| Gear Train | 3-Stage Planetary |
| Wire Rope Diameter | 4.8 mm |
| Wire Rope Length | 15 m |
| Mounting Bolt Pattern | 124 mm x 76 mm |
| Voltage | 12V |
| Rated Line Pull | 2500 lbs |
| Motor Power | 1.2 HP |
| Overall Dimensions | 114mm x 114mm |
| Weight | 8.2 kg |
To Next Page
