MODEL F73（17603）
2
Please use this product under the water temperature between 5～50℃,
water pressure 0.15～0.6MPa. Failure to use this product under such
conditions voids the warranty.
If the water pressure exceeds 0.6Mpa, a pressure reducing valve must
be installed before the water inlet. While, if the water pressure under
0.15MPa, a booster pump must be installed before the water inlet.
It is suggest to install PPR pipe, corrugated pipe or UPVC pipe, instead
of TTLSG pipe.
Do not let children touch or play, because carelessness operating may
cause the procedure changed.
When the attached cables of this product and transformer are changed,
they must be changed to the one that is from our factory.
To Next Page
Loading...
