Runxin 17603 - Product Structure and Technical Parameters

MODEL F73（17603）
6
In the above table, First Grade Na+ represents First Grade Na+
Exchanger. Second Grade Na+ represents Second Grade Na+
Exchanger.
 When the water turbidity exceeds the conditions, a filter should be
installed on the inlet of control valve.
 When the water hardness exceeds the conditions, the outlet water
hardness will hardly reach the requirement of boiler feed water（0.03
mmol/L）. It is suggested to adopt second grade softener.
1.4. Product Structure and Technical Parameters (The
appearance is just for reference. It is subjected to the real
product.)
Model
Applicable Power
Adapter Output
Flow Rate
m
3
/h
Regeneration Mode