Runxin 63518 User Manual

MODEL: 63518-N77A1 /63618-N77A3/ 53518-N77B1
28
3.3. System Configuration and Flow Rate Curve
A. Product Configuration
Product configuration with tank, resin volume, brine tank and injector.
Tank Size
（mm）
Resin
Volume
（L）
Flow
Rate
（t/h）
Brine Tank
Size (mm)
The Minimum
Salt
Consumption for
Regeneration
（Kg）
Injector
Model
φ750×1800
450
11.0
φ840×1335
67.50
7702
φ900×2400
900
16.0
φ1080×1460
135.00
7703
φ1000×2400
1100
20.0
φ1240×1575
165.00
7704
Attention: The flow rate calculation is based on linear velocity
25m/hr; the minimum salt consumption for regeneration calculation
is based on salt consumption 150g / L (Resin).
B. Flow Rate Characteristic
1) Pressure-flow Rate Curve

Runxin 63518 Specifications

General

Brand	Runxin
Model	63518
Category	Control Unit
Language	English

Summary

User Notices and Warnings

Safety Precautions for Operation

Important warnings and precautions for safe operation and installation.

Product Overview

Valve Applications and Use Cases

Details on where and how the valve can be used for water treatment.

Key Product Features and Functions

Highlights unique features like sealing, installation, and operational modes.

Valve Structure and Technical Specs

Valve Installation Guide

Provides instructions for installing the valve, including notices and device location.

Basic Settings and Usage

PC Board Functions and Indicators

Explains the functions of indicators, buttons, and modes on the control board.

General Settings and Usage

Covers parameter specification, process display, and general usage guidelines.

Parameter Specification Details

Usage and Water Quality Guidelines

Valve Applications

PC Board Functions and Connections

Details the functions and wiring for various PC board connectors.

Parameter Settings

Setting Service Time

Parameter Enquiry and Setting

How to Enquire Parameters

How to Set Parameters

Instructions on how to enter parameter setting mode and adjust values.

Detailed Parameter Setting Steps

Step-by-step guide for setting Time of Day, Control Mode, Regeneration Time, etc.

Trial Running

Valve Trial Running Procedure

Detailed steps for testing the valve after installation and parameter setup.

Troubleshooting

Control Valve Faults and Solutions

Lists common problems with control valves and their solutions.

Controller Faults and Solutions

Lists common problems related to the control board and indicators.