MODEL：F67Q/F71Q/F68Q/F69Q/F116Q/F117Q
1
Notice
To ensure normal operation of the valve, please consult with
professional installation or maintenance personnel before using it.
If there is any pipeline engineering and electric works, it must be
finished by professional at the time of installation.
Do not use the control valve with the unsafe or the quality-unknown
water.
Depending on the changing of working environment and water
requirement, each parameter of softener should be adjusted accordingly.
When the water treatment capacity is too low, please check the resin. If
the reason is shortage of resin, please add; if the resin turns to reddish
brown or broken, please replace.
Test water quality periodically to verify that system is performing
satisfactorily.
Sodium used in the water softening process should be considered as
part of your overall dietary salt intake. Contact your doctor if you are on a
low sodium diet.
When this valve is used for softening, please ensure the solid salt is
available in the brine tank all the time during use. The brine tank should
be added by the clean water softening salts only, at least 99.5% pure,
forbidding use the small salt.
Do not put the valve near the heat resource, high humidity, corrosive,
intense magnetic field or intense librations environment. And do not
leave it outside.
Forbidden to pull the injector body. Avoid to use injector body as
support to carry the system.
Forbidden to use the brine tube or other connectors as support to carry
the system.
To Next Page
Loading...
Need help?
General
