MODEL：F67Q/F71Q/F68Q/F69Q/F116Q/F117Q
12
1.5. Installation
A. Installation notice
Before installation, read all those instructions completely. Then
obtain all materials and tools needed for installation.
The installation of product, pipes and circuits should be
accomplished by professional to ensure the product can operate
normally.
Perform installation according to relative pipeline regulations and
the specification of Water Inlet, Water Outlet, Drain Outlet, Brine Line
Connector.
B. Device location
① The filter or softener should be located close to the drain.
② Ensure the unit is installed in enough space for operating and
maintenance.
③ Brine tank needs to be close to softener.
④ The unit should be kept away from the heater, and not exposed
outdoor. Sunshine or rain will cause the system damage.
⑤ Please avoid to install the system in one acid/alkaline, Magnetic or
strong vibration circumstance, because above factors will cause the
system disorder.
⑥ Do not install the filter or softener, drain pipeline in circumstance
which temperature may drop below 5℃, or above 50℃.
⑦ The system should be installed in a place where there will be the
minimum loss in case of water leakage.
To Next Page
Loading...
