Rupes SSPF - Specifications; General Guidelines; Start-Up Procedures; Pre-Operation Checks

2
SPECIFICATIONS
TYPE
SSPF
SO73
SO84A
SSCA
ELECTRIC SHOCK PROTECTION CLASS II II II II
RATED SUPPLY VOLTAGE V ~230V-50Hz ~230V-50Hz ~230V-50Hz ~230V-50Hz
RATED CURRENT INPUT A 1.5A 0.9A 1.1A 1.5A
RATED POWER INPUT W 350W 200W 250W 350W
WEIGHT [kg] 3.6 kg 3.0 kg 3.0 kg 3.6 kg
PITCH [mm] 5 mm 4.4 mm 2.5 mm 5 mm
VIBRATION FREQUENCY [1/min.] 6000 7000 8500 6000
RUBBER (CAOUTCHOUC) PLATE WITH VELCRO
FASTENING
YES NO YES YES
PERFORATED RUBBER (CAOUTCHOUC) PLATE YES NO YES YES
STANDARD LONG BASE NO YES NO NO
WORKING PLATE DIMENSIONS [mm] 115x208 mm 115x208 mm 115x208 mm 115x208 mm
DUST EXTRACTION YES NO YES YES
BUILT-IN TURBINE - DUST EXTRACTOR NO NO NO YES
GENERAL GUIDELINES
The machine shall work with a proper dust extraction system, which may be ordered separately.
START-UP
Before starting up the machine make sure that:
- the packaging is intact and there is no visible damage due to transport or storage;
- the machine is complete;
- make sure that the amount and type of components comply with the instructions;
- the compressed air system meets the requirements specified in the Specifications Table and on the
unit rating plate; the unit rating plate design and definitions are provided on page 6;
- the energy source and plug-in sockets may carry the rated power specified in the Table and on the
unit rating plate; rating plate specification is provided on page 6.
INSTRUCTIONS REGARDING SAFETY AND ACCIDENT PREVENTION DURING WORK
Instructions regarding safety and accident prevention during operation are provided in the “Safety Rules”
leaflet, which makes an integral part of these documents; instructions for use provide complementary
information only, which is strictly related to the specific use of the machine.