5
C REDUCING TEMPERATURE
17 This takes a bit longer, as the iron has to lose the heat it has built
up, so be patient. It’s best to organise your ironing so that you
don’t need to reduce the temperature.
C STEAM IRONING
18 Set the temperature control to S or above, otherwise you’ll get
water on your clothes, not steam.
19 Set the steam control to the level you want, S = no steam, # =
high steam.
20 Wait till the light goes out, then start ironing.
* SPRAY
, Water spotting affects some fabrics. Test it on a hidden part of
the fabric.
21 The spray works with dry or steam ironing, as long as there’s
water in the reservoir.
22 Lift the iron off the fabric, and aim the spray nozzle at the fabric.
23 Press the * button – you may have to press it 2 or 3 times to
pump water through the system.
S SHOT OF STEAM
24 This works with dry or steam ironing, as long as there’s water in
the reservoir, and the temperature is above S.
25 Lift the iron off the fabric, then press the S button
26 It may need 2 or 3 presses to pump water through the system.
27 Leave 4 seconds between shots, to let the temperature build up.
C DRY IRONING
28 If you’re going to be dry ironing for 20 minutes or more, empty
the reservoir first, to avoid spontaneous bursts of steam.
29 Set the steam control to S.
30 Wait till the light goes out, then start ironing.
To Next Page
Loading...
Need help?
General
