General
Ensure the Pro-Mix is switched off and unplugged before cleaning.
Clean the Pro-Mix as soon after use as possible to prevent residues setting.
Wash the bowl and accessories in warm soapy water, rinse well.
Leave them to drain and air dry.
You may put the bowl and mixing accessories in a dishwasher.
NOTE: the harsh environment inside the dishwasher may affect the surface
finishes. The damage is cosmetic only and should not affect the operation of the
appliance.
Wipe the external surfaces of the Pro-Mix with a clean damp cloth and immediately
buff with a soft dry cloth.
Do not immerse the motor unit in water or any other liquid.
Do not use harsh or abrasive cleaning agents or solvents.
Blender
Wash the jug and lid in warm soapy water and rinse well. Leave them to drain and air
dry.
You may put the jug and lid in a dishwasher.
Remove the blade unit, (See ‘Removing the blade unit’ section) and wash it in warm
soapy water using a nylon brush to clean the blades.
Optional Accessories
1. Wash, rinse and wipe the accessories. Note that they can be put in the dishwasher
except for the pasta maker accessories and the metal components of the mincer
accessory. These components include the fine mincing disc, medium mincing disc, the
worm shaft, cutter blade, coarse mincing disc and the screw ring.
2. The mincing discs and the cutter blade must be kept lubricated. Carefully wipe them
with cooking oil after each use.
3. If you find that your accessories have become discoloured by food such as carrots,
oranges etc. - rub them gently with a kitchen towel dipped in cooking oil and then clean
them in warm soapy water.
4. You can either wipe the pasta accessories clean with a damp cloth or simply sprinkle
with flour and wipe with a dry cloth before storing.
CAUTION:
Do not wash the pasta maker accessories and the metal components of the mincer
accessory in the dishwasher. Do not immerse the pasta maker accesories in water.
CARE AND MAINTENANCE
12
To Next Page
Loading...
