EasyManua.ls Logo

Russell Hobbs RH1042

Russell Hobbs RH1042
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
11
Installation
Water drainage
The water outlet hose should be mounted at a height of minimum 60 cm,
maximum 80 cm from the ground.
The end of the water outlet hose can be fitted directly to the drainage
hole on the back side of the washer.
When installing the outlet hose, secure it with a string or tie extensions
(not included).
Never attempt to extend the water outlet hose by adding extra parts.
If the outlet hose is too long, do not force it back into the washer.
This will cause abnormal noise and damage to the product.
Diagram below illustrates installation depending on water supply and waste
outlet.
10cm
Do not insert drain hose more
than10cm (100mm) down the
waste outlet pipe.

Related product manuals