EasyManua.ls Logo

Russell Hobbs RH2TTDW101 - Problem Solving Guide

Russell Hobbs RH2TTDW101
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P a g e | 24
RH2TTDW201 Table Top Dishwasher Revision 1.5
PROBLEM SOLVING
Appliance does not turn
on
Check it is plugged in
Check the plug socket operates correctly
using another appliance
Check the fuse
Water not removed
from appliance at the
end of the cycle
Check the drain hoses are not twisted or
trapped
Check the filter is not clogged
Check the waste pipe, sink or bucket is not
blocked
Excess bubbles
Incorrect type of detergent used
Open the door for 20-30 minutes to allow the
bubbles to dissipate.
Add 1.5L of water inside the machine and run
a drain cycle
White residue on the
dishes/appliance
Water hardness
Clean the appliance, and check the salt levels
and hardness setting
Dishes not clean
Dishes not loaded properly
Follow the loading guidelines in this manual
Appliance is leaking
Immediately switch off at the mains and turn
off the water inlet tap
Check all installation points for leaks
Remove water manually, and restart the
appliance
If leak continues, switch off and contact
customer services
Knocking noise during
cycle
Loose cutlery/dishes
Spray arm may be coming into contact with
dishes
Loose spray arm, check in correct position
Cloudiness on glassware
Use less detergent and run a short quick cycle
to clean

Related product manuals