EasyManua.ls Logo

Russell Hobbs RH2TTDW101

Russell Hobbs RH2TTDW101
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P a g e | 8
RH2TTDW201 Table Top Dishwasher Revision 1.5
ELECTRICAL SAFETY INSTRUCTIONS
This appliance must be plugged into an earthed socket.
Before switching on, ensure the voltage of your
electricity supply is the same as that indicated on the
rating plate. This product is designed to operate on
AC220240V; 50Hz. Connection to any other power
source may damage the unit.
This product may be fitted with a non-rewireable plug. If
it is necessary to change the fuse in the plug, the fuse
cover must be refitted. If the fuse cover becomes lost or
damaged, the plug must not be used until a suitable
replacement is obtained.
Changing the plug should only be carried out by a
qualified electrician. The plug removed must be
disposed of safely, as insertion into a 13 Amp socket is
likely to cause an electrical hazard.

Related product manuals