• The dishwasher should not be placed on top of the
water hoses or the electricity supply cable.
• If the inlet hose is not long enough, contact a specialist
store or an authorised technician
• The hose should not be bent or compressed.
• The appliance must be connected to the water supply
network using new hoses. Do not use old hoses.
• Ensure that the new hose supplied is connected and the
old hose is disposed of safely.
• DO NOT overtighten the hose connector, hand tight is
sufficient.
• Ensure the fill hose is not kinked.
• Tap connections: A range of adaptors are available to
suit your tap.
• DO NOT connect the dishwasher to a single outlet
instantaneous water heater or an electric heater.
• DO NOT be connected to a surface water drain.
• The maximum permissible inlet water pressure is 1Mpa.
• The minimum permissible inlet water pressure is 0.04Mpa.
• Do not abuse, sit on, or stand on the door or dish rack of
the dishwasher.
• Do not obstruct any ventilation openings.
To Next Page
Loading...
