For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
13
Installation
• After installation, do not switch the power to the refrigerator on for at
least 3 hours – the unit needs to stand.
• The unit should be kept away from direct sunlight.
• Remove all transport tapes and foam protection pieces . Clean the
interior of the appliance with a cloth dampened in lukewarm soap and
water. Wipe with clear water and wipe dry.
• When the appliance has been positioned, adjust the two front feet to
ensure the unit is stable. This is essential to ensure quiet running and
proper door opening /closing. See figure below.
• Once the appliance has been standing for 3 hours, plug in the
refrigerator, locate the thermostat knob inside the compartment, set to
"3" position and switch on the electricity. The compressor will begin to
work. Close the door.
• Leave the appliance for a minimum of 3 hours for the correct
temperature to be reached before placing food inside.
To Next Page
Loading...
