For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am –
6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
13
Reversing the Door
You will need to tilt the fridge backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the fridge flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
• Remove the screw covers on the top of the fridge freezer. There are two
screws at the back of the lid and two at the front, remove all four screws.
Remove the three screws on the top of the freezer door hinge. Remove the
washer, nut and hinge pin.
• Remove the freezer door.
• Remove the two screws from the middle hinge and remove the fridge door.
• Underneath the fridge, unscrew the adjustable foot, remove the three
screws, the nut, the washer, the lower hinge, and the bottom hinge pin.
Transfer these parts to the other side of the fridge, placing them in a
symmetrical position to where they were removed. Build the hinges on the
left side of the fridge freezer, as they were removed from the right side.
• Fit the lid to the top of the fridge freezer, replacing the four screws.
For assistance with this or any issues please contact the service team on
0845 208 8750
To Next Page
Loading...
