USAGE INFORMATION
Thermostat Setting
• The thermostat automatically regulates the inside temperature of the refrigerator
compartment. By rotating the knob from position « 1 » to « 7 », colder
temperatures can be obtained. (1 being HIGH and 7 being LOW)
• « 0FF » position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the refrigerator compartment, you can set the
knob between minimum and medium position.(1-4)
• For long-term storage of food in the refrigerator compartment, you can set the
control knob from medium to high position.(4-7)
• Note that: The temperature of the freshly stored food and how often the door is
opened affects the temperature in the refrigerator compartment. If required,
change the temperature setting.
• When you first switch on the appliance, for starting suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• During this time do not open the door frequently or place a lot of food inside
the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugged the unit in order not to damage the compressor.
Your appliance is designed to operate in the ambient temperature intervals stated
in the associated standards, according to the climate class stated on the
information label. We do not recommend operating your fridge out of stated
temperatures, value limits in terms of cooling effectiveness.
For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am –
6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
6
Temperature selection
The temperature of the refrigerator is controlled
manually by the knob. However the number shown on the
knob does not directly represent the temperature. The
larger the number, the lower the interior temperature will
be.‘4’ represents normal use. ‘1’ is the warmest setting
and 7 is the coolest.
To Next Page
Loading...
Need help?
General
