RUSTA 759013120301 - Page 73

10
FRAME PAD ASSEMBLY
Step 10 – Attach Center Leg Support Cover
In this step, you will attach covers to the two Center Leg Supports.
A. Attach Leg Support Cover (# 22B) to the outer facing side of Center Leg Support by wrapping the Velcro
around the side tubes as shown in ENLARGED DIAGRAM G.
B. Attach Leg Support Cover (# 22A) to the inner facing side of Center Leg Support in the same manner.
C. Tie all elastic straps on the two covers together as shown in ENLARGED DIAGRAMS H, I and J.
D. Tie the elastic straps sewn on the bottom of the covers onto the rings on the Center Leg Support as shown
in ENLARGED DIAGRAM K and L.
FIGURE 18
ENLARGED
DIAGRAM
H
ENLARGED
DIAGRAM
I
ENLARGED
DIAGRAM
G
ENLARGED
DIAGRAM
J
FIGURE 19
ENLARGED
DIAGRAM
K
ENLARGED
DIAGRAM
L
27
G
K
L
H I J
22 A 22 B
73
IM_759013120301_Trampoline_Advanced_550x400cm_v3.indd 73 2021-01-27 17:49