vii
VIII Flying with TCAD
Describes operation of TCAD and illustrates a flight from
startup to landing.
IX Operating Tips
Contains useful suggestions to maximize the utility of the Ryan
TCAD.
X Built-In Test & Fault Displays
Describes the TCAD built-in test function and fault displays.
Appendix 1 Setup
Describes parameters that can be set by the pilot.
Appendix 2 Limits
Describes limitations of the TCAD and how those limitations
can affect performance of the equipment.
Appendix 3 Excerpts
Presents excerpts from FAA Advisory Circular 90-48C, Pilot's
Role in Collision Avoidance.
Appendix 4
Contains Specifications, Factory Settings, Warranty, Disclaimer,
and Customer Support information.
Multifunction Display Interface Supplement (P/N 32-2303)
Contains information and operating instructions for TCAD
Interface with Multifunction Displays.
To Next Page