Chapter
3 Periodic Maintenance
2)
Cleaning the
air
pump filter
A WARNING
Mount
the
cover removed
in
place after
cleaning.
Failure
to
follow
this
instruction may result
in
a serious
injury.
3) Cleaning the water fountain
Maintenance Edition - 28
If
the pump filter is dirty, the vacuum force
of
the pump will be lowered.
Take out the filter and remove any dirt and foreign particles on the filter,
and dip it in cleaning solution.
When the vacuum force
of
the pump is still low even after cleaning it,
please replace the filter with a new one.
Foreign particles will accumulate in the water fountain. Remove any
foreign particles in the water fountain.
Close the ON/OFF valve
of
the flow hose
on
the dampening solution
cooling/circulation device to drain the dampening solution in the water
fountain.
After the cleaning, be sure to open the ON/OFF valve.
To Next Page
