Chapter
1 RYOBI PCS-F
5.
Returning
to the
Ink
Fountain Key 0 Point
The ink fountain key opening volume on the unit selected by using the unit selection button can
be
returned to "0" by
using the ink fountain key 0 point reset button.
1
0
8-ERo_E_I;::::=1======2=====3======4
=="'===5=====6=====0==7=====0a~~
~~~
UNITOA
0 0 0 0 0 . K L M
F
~;
~:L-rn-~-rn--rn--rn-:--rn-:--rn-:--rn-
0
__
rn__,
~~~
1 2
.3
~~-O[L_oc_K)G~''L[E=sc~)o
__
~l=l=======p========I~I~[Y=Es~JQ~[N=o~JIL-~:~-~~A_~~Ac~
1.
Check that each button (H through M) on the ink fountain preset panel is OFF.
2. Push the ink fountain key 0 point reset button (E).
I ALL INK KEYS ARE CLOSED. SELECT UNIT
3. Select the unit that you want to return the ink fountain key opening volume to "0" by using the unit selection button.
(At this time, you can select both the first and second units.)
ALL SELECTED INK KEYS ARE CLOSED
YES OR NO
4.
Push
the~
button to return the ink fountain keys on the selected unit to "0" in order automatically. At this time, the
following message is indicated on the message display (P).
ALL NO.* UNIT INK KEYS ARE CLOSED
WAIT A MINUTE
5. When completed, the ink fountain key 0 point reset button (E) lamp will go
off
automatically.
Optional Accessories Edition - 13
To Next Page
Loading...
Need help?
General
