Ryobi 3302HA - Never Touch the Electrical Parts with Wet Hands; Keep the Area Around the Press Clean; Never Use Broken Tools; Never Put Your Hand on the Feeder Pile While It Is Rising

A CAUTION
Never touch the electrical parts with wet
hands!
Never do with wet hands, the plugging in or unplugging
of the press power cord plug or any connecting plug,
turning the power switch ON or OFF, and handling
any other electrical parts.
Failure to follow this instruction may result in an electric
shock.
Never use broken tools!
Replace any worn out or broken tools with new ones.
Failure to follow this instruction may result in an injury.
Chapter 4 Precautions When Operating
Keep the area around the press clean!
Never leave any tools on the floor. Never allow oil and
grease to collect on the floor.
Keep the area around the press clean.
Failure to follow this instruction may result in an injury.
Never put your hand on the feeder pile
while it is rising!
Never put your hand on the top surface of the feeder
pile, while
it is rising.
Failure to follow this instruction may result in an injury.
Safety Operation Edition - 13