Chapter 1 Operation Procedures
Operation Edition - 1 0
3) Set the water rider oscillating roller.
A CAUTION
Stop the press before setting. Failure to follow this instruction may result in an
injury.
{1)
Tum the water rider oscillating roller release knob
(1) and set at the
12
o'clock position.
When there
is
a unit which is not used, be sure to
tum the knob
(1) and set at the 3 o'clock position
and pull the water rider oscillating roller by hand
toward you so that the water rider oscillating roller
is
released from the water form roller.
To Next Page
Loading...
