Ryobi bts20r - Page 21

22
RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20R
The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your
TABLE SAW or when ordering repair parts.
WARNING: Improper repair of a double insulated tool can result in damage to the double insulation system possibly causing electrical shock or
electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized Service
Center. For the service center nearest you call 1-800-525-2579.
* Standard Hardware Item – May Be Purchased Locally
A131010901 RIP FENCE ASSEMBLY
1 410139719 * NYLOCK SCREW (10-32 x 1 in.) .................1
2 0131010317 CLAMPER - B ..............................................1
3 0131010218 REAR DECK ................................................1
4 0131010908 PUSH ROD ..................................................1
5 414011023 ROLL PIN (D3.175 X 19.05
mm) ..................1
6 0181010907 COMPRESSION SPRING ............................1
7 414050008 PIN (D6 X 33.7) ............................................1
8 0131011801 RIP FENCE RAIL ........................................1
9 412011064 WASHER (D7 X D16 X 1.5T) ........................2
10 410491703 * SCREW (1/4-20 x 5/8 in.) ............................2
11 410331008 * SCREW AND WASHER (M4 x 10 mm) ........1
PARTS LIST FOR FIGURE J
Key Part
No. Number Description Qty.
Key Part
No. Number Description Qty.
12 0133010217 SCALE INDICATOR .....................................
1
13 0131010213 SLIDER ........................................................2
14 410171716 * SCREW (8-32 x 9.5 mm) .............................2
15 0131010909 PIN ...............................................................1
16 0131010315 CLAMPER - A ..............................................1
17 0131010226 BLOCK ........................................................
1
18 0131010104-94 FRONT BLOCK ............................................1
19 410195012 * SCREW (M3 x 8 mm) ...................................1
20 0181010506 ECCENTRIC ROLLER ..................................1
21 0181010227 FENCE LOCKING HANDLE/
AUXILLIARY HANDLE .................................
1
22 414050010 PIN (D4) .......................................................
1