Ryobi DS1100 User Manual

OPERATOR'S MANUAL
DETAIL SANDER
MODEL DS1100
DOUBLE INSULATED
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Sanding Pad Triangle shaped
No load speed 12,000 spm
Motion Oscillating
Rating 120 volts, 60 Hz, AC
Input .30 amperes
Paper type Pressure sensitive adhesive backed
Arc size 3.0 mm at tip
THANK YOU FOR BUYING A RYOBI DETAIL SANDER.
Your new Detail Sander has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new sander.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your sander properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.

Ryobi DS1100 Specifications

General

Voltage	120 V
Dust Collection	Yes
Power Source	Corded
Speed	Opm
No Load Speed	12, 000 OPM

Summary

Specifications

Rules for Safe Operation

Work Area Safety

Guidelines for maintaining a clean, well-lit, and safe work environment.

Electrical Safety

Precautions regarding the tool's electrical system and power connection.

Personal Safety Measures

Recommendations for operator alertness, attire, and avoiding accidents.

Tool Use and Care Guidelines

Instructions on proper tool usage, maintenance, and accessory selection.

Service and Repair

Information on performing tool service and using identical replacement parts.

Specific Safety Rules for Sanders

Safety advice unique to operating sanders, including handling and wet sanding.

Additional Safety Rules

General safety practices, including eye protection, hearing, cord care, and extension cords.

Symbols Explained

Safety Alert Symbol

Indicates danger, warning, or caution to draw attention to safety.

Danger

Signifies a hazard that could cause serious injury or death.

Warning

Signifies a hazard that could cause serious injury.

Caution

Signifies a hazard that could cause property damage or personal injury.

Note

Provides vital information or instructions for operation or maintenance.

Tool Features

Double Insulation System

Explanation of the safety concept eliminating the need for grounding.

Oscillating Motion

Details the 3.0 mm sanding arcs and suitability for detailed work.

Switch Operation

Instructions on how to turn the sander ON and OFF.

Electrical Connection Requirements

Specifies power supply requirements: 120V, 60Hz, AC only.

Operation Instructions

Applications of the Sander

Lists the intended uses for the detail sander.

Installing Sandpaper

Step-by-step guide on how to attach sandpaper to the pad.

Preparing for Operation

Ensuring the work is secured and air vents are clear before use.

Sanding Technique

Guidance on how to hold and move the sander for effective results.

Sandpaper Selection Guide

Advice on choosing appropriate grit sandpaper for different tasks.

Maintenance and Care

General Cleaning and Solvents

Advice on cleaning plastic parts and avoiding harmful chemicals.

Lubrication Requirements

Information that the tool is pre-lubricated for its lifetime.

Extension Cord Usage

Guidelines for selecting appropriate extension cords and their care.

Optional Accessories

Polishing Pads

Optional pads for buffing and polishing applications.

Scraper Assembly

Attachment for removing paint and glue from surfaces.

Preparation Pads

Optional pads for dulling surfaces for repainting.

Parts List

Service and Model Information

Extension Cord Caution

Detailed chart on selecting extension cords based on amperage and length.

Service Center Information

Instructions on contacting authorized service centers for repairs.

Model and Serial Number Recording

Guidance on locating and recording the tool's model and serial numbers.