Ryobi EVERCHARGE P180TH

To Next Page

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

EVERCHARGE

™

WALL

CHARGER

CHARGEUR MURAL

DE EVERCHARGE

™

CARGADOR DE PARED

DE EVERCHARGE

™

P180/P180TH

 Safety Rules for Charger .....................2

Symbols ...............................................3

 Assembly .............................................4

 Operation ......................................... 4-5

 Maintenance ........................................6

 Illustrations ..........................................7

 Parts Ordering/Service ........ Back page

 Règles de sécurité

concernant le chargeur .......................2

Symboles ............................................. 3

 Assemblage ......................................... 4

 Utilisation ......................................... 4-5

 Entretien ..............................................6

 Illustrations ..........................................7

 Commande de pièces

et réparation ...................... Page arrière

WARNING: To reduce the risk

of injury, the user must read and un-

derstand the operator’s manual before

using this product.

 Reglas de seguridad para el

empleo del cargador ...........................2

Símbolos .............................................3

 Armado ...............................................4

 Funcionamiento .............................. 4-5

 Mantenimiento ....................................6

 Ilustraciones ........................................7

 Pedidos de piezas

y servicio ........................ Pág. posterior

ADVERTENCIA: Para reducir

el riesgo de lesiones, el usuario debe

leer y comprender el manual del

operador antes de usar este producto.

AVERTISSEMENT :

Pour

réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation avant

d’employer ce produit.

TABLE DES MATIÈRES ÍNDICE DE CONTENIDO

TABLE OF CONTENTS

**************** **************** ****************

SAVE THIS MANUAL FOR

FUTURE REFERENCE

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

Main Page

Need help?

Do you have a question about the Ryobi EVERCHARGE P180TH and is the answer not in the manual?

This document is an operator's manual for the RYOBI EVERCHARGE™ WALL CHARGER, specifically models P180/P180TH. It provides essential information for safe and effective use, maintenance, and troubleshooting of the device. The manual is presented in three languages: English, French, and Spanish, ensuring accessibility for a broad user base.

The RYOBI EVERCHARGE™ WALL CHARGER is designed to charge RYOBI ONE+™ 18V Lithium-Ion battery packs. Its primary function is to provide a convenient and efficient way to keep these battery packs charged and ready for use with compatible RYOBI tools. The charger is intended for indoor use only and should be mounted securely to a wall to prevent accidental dislodgement.

Important Technical Specifications:

The charger is designed to operate with a standard household voltage of 120 volts, 60 Hz. It is crucial to ensure that the power supply matches these specifications to prevent damage to the charger or battery packs, and to avoid electrical hazards. The manual specifies the acceptable cord lengths and wire gauges for extension cords if they are necessary, emphasizing the use of 25' (16 AWG), 50' (16 AWG), or 100' (16 AWG) cords, all being American Wire Gauge (AWG) compliant. This detail is vital for maintaining electrical safety and optimal charging performance.

Usage Features:

The manual outlines several key usage features and instructions for the RYOBI EVERCHARGE™ WALL CHARGER:

Mounting: The charger is designed for wall mounting. It includes instructions and diagrams (Figures 1-4) for securely attaching the charger to a wall using screws. An optional accessory holder can also be mounted to store additional accessories. Proper mounting is essential for stability and safety.
Charging Battery Packs: To charge a battery pack, it is simply slid onto the charger until it is fully seated in the cradle. The charger is equipped with indicators (though not explicitly detailed in the provided text, typically LED lights) to show the charging status.
Charging Status: The manual mentions that battery packs are shipped in a low charge condition and should be charged before first use. It also notes that the charger will periodically wake from Energy Save mode to ensure the battery pack remains in a fully charged state.
Charging Hot/Cold Battery Packs: The charger is designed to manage charging based on battery temperature. If a battery pack is too hot or too cold, the charger will automatically begin charging once the battery temperature reaches an acceptable range. This intelligent charging feature protects the battery pack from damage and extends its lifespan.
Energy Save Mode: Once charging is complete, the charger will enter into an Energy Save mode to conserve energy. This feature highlights the charger's efficiency and environmental consciousness.
Battery Pack Removal: To remove a battery pack, the user simply lifts it up and away from the charger.
Outdoor Use: The manual explicitly states that the charger is not intended for outdoor use or exposure to wet or damp conditions, as water entering the charger will increase the risk of electric shock.
Damaged Charger/Cord: Users are warned not to operate the charger with a damaged cord or plug, or if it has received a sharp blow, been dropped, or otherwise damaged. Such damage could lead to electric shock or fire. If the charger is damaged, it should be serviced by a qualified service technician.
Unplugging: It is recommended to unplug the charger from the outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.
Disconnection from Power Supply: The manual advises disconnecting the charger from the power supply when not in use to reduce the risk of electric shock or damage to the charger. This also helps prevent damage to the charger during a power surge.
Risk of Electric Shock: Do not touch uninsulated portions of the output connector or uninsulated battery terminal.

Maintenance Features:

The manual provides general maintenance guidelines to ensure the longevity and safe operation of the RYOBI EVERCHARGE™ WALL CHARGER:

Cleaning: Use only mild soap and a damp cloth to clean the charger. Avoid using solvents or harsh chemicals, as these can damage plastic parts and create a risk of personal injury.
Replacement Parts: When servicing, use only identical replacement parts. The use of any other parts could create a hazard or cause product damage.
Storage: Always remove the battery pack before storing the charger or any time the charger is unplugged. This prevents accidental discharge or damage.
Inspection: Periodically inspect the charger for any signs of damage, wear, or loose connections. If any issues are found, the charger should be serviced by a qualified professional.
Battery Terminal Maintenance: Keep the battery terminals clean and free from debris to ensure good electrical contact and efficient charging.

Safety Information:

A significant portion of the manual is dedicated to safety warnings and symbols, emphasizing the importance of reading and understanding all instructions before using the device. Key safety symbols include:

DANGER: Indicates an hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates an hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates an hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates information considered important, but not related to a potential injury (e.g., messages relating to property damage).
Safety Alert Symbol: Indicates a potential personal injury hazard.
Read Operator's Manual: To reduce the risk of injury, users must read and understand the operator's manual.
Eye Protection: Always wear eye protection with side shields marked to comply with ANSI Z87.1.
Wet Conditions Alert: Do not expose to rain or use in damp locations.

The manual also includes specific warnings regarding:

Battery Type: Only use RYOBI ONE+™ 18V Lithium-Ion battery packs with this charger. Using other battery types could lead to fire, personal injury, and damage.
Chemicals: Do not use brake fluids, gasoline, petroleum-based products, penetrating oils, etc., to clean the charger, as these chemicals can damage plastic and create a risk of serious personal injury.
Electrical Safety: Always ensure the charger is plugged into a functional outlet and avoid using damaged cords or plugs. Do not modify the charger or use it for purposes other than its intended function.

In summary, the RYOBI EVERCHARGE™ WALL CHARGER is a dedicated charging solution for RYOBI ONE+™ 18V Lithium-Ion battery packs, designed with user safety and battery longevity in mind. Its features include intelligent charging based on temperature, an energy-saving mode, and clear instructions for safe mounting and operation. Regular maintenance and adherence to the provided safety guidelines are crucial for optimal performance and to prevent potential hazards.