PRODUCT SPECIFICATIONS
Cultivator attachment
Model ACT05
Maximum working width 25.7 cm
Maximum working depth 20.3 cm
Weight 6.6 kg
For assembling with petrol-driven powerhead (below values
measured with RPH254A, RLT254CDSO, RLT254SDSO,
RBC254SESO, RBC254SBSO powerhead)
Powerhead weight 5.2 kg
Full tank volume 580 cm
3
Engine displacement 25.4 cc
Max engine performance
0.75 kW
Engine speed (max) 12000 min
-1
Engine speed (idle) 2600-3400 min
-1
Maximum no-load speed 0.5 m/s
Noise emission values determined according to EN
709:1997+A4:2009
A-weighted sound pressure
level
97.6 dB(A)
A-weighted sound power level 101.7 dB(A)
Uncertainty 2.5 dB
Vibration values determined according to EN
709+1997+A4:2009
Front handle 5.2 m/s
2
Rear handle 8.0 m/s
2
Uncertainty 1.5 m/s
2
For assembling with electric-driven power head (below values
measured with RPH3600, RLT36X33S, RLT33B33S power head)
Rated power 1100 W
Rated voltage 36 V
Maximum no-load speed 0.23 m/s
Noise emission values determined according to EN
709:1997+A4:2009
A–weighted sound pressure
level at the operator position
85.7 dB(A)
A–weighted sound power level 95.2 dB(A)
Uncertainty 2.5 dB
Vibration values determined according to EN
709+1997+A4:2009
Front handle 1.5 m/s
2
Rear handle 1.7 m/s
2
Uncertainty 1.5 m/s
2
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
